transducersite.com

Paine Electronics is a manufacturer and supplier of first-rate high-pressure transducers. The Washington-based company boasts of a wide selection of transducers that meet both the rigorous requirements of standard pressure monitoring as well as the high demands of customized applications.

The industry-renowned Paine pressure transducer has a warranted reputation for precision and dependability. The proprietary technology behind its design is cutting-edge. The quality of its engineering is unsurpassed in the market. For these reasons the Paine pressure transducer has been a staple instrument in the most grueling undertakings.

Design
Paine Electronics is continuously searching for efficient solutions to existing and anticipated pressure monitoring problems. The company keeps and constantly builds up a substantial library of pressure transducer designs for quick reference. Because all designs are modifiable, clients are spared the extra costs and delays that normally go along with development.

In fact, the system has been so successful that 80% of Paine Electronics’ business comes from customizing pressure transducer designs. Some of the difficult design challenges that Paine engineers often deal with consist of the need for extraordinarily small or outsized transducers, transducers with exceptional safety guarantees, and unusually tough and resistant transducers.

At the forefront of Paine’s research and development is a miniature pressure transducer measuring only half an inch in diameter. Its small size gives it incomparable adaptability to just about any tool currently in use, in any environment.

Quality
The outstanding quality of the Paine pressure transducer is a by-product of excellence in all aspects of manufacturing. Paine Electronics conducts expert machining using advanced equipment and the finest materials. This gives the Paine pressure transducer casings and components very high tolerances to even the most extreme conditions.

Most Paine transducers have built-in microcircuits. Paine is experienced in creating circuits in unusual shapes to adapt to unique specifications. These circuits are shock-resistant. Special alloys are carefully selected to ensure stability and longevity of each type of transducer. For example, titanium is preferred for oceanographic transducers because it has a high compatibility with sea water.

Quality control and assurance are taken as seriously. Every Paine pressure transducer completes three test cycles before it is released. A test cycle will normally include exposure to degrees of pressure and temperature that are well above the transducer’s declared maximum operating limits.

A transducer is an instrument used to produce readable output from translated energy sources. In industrial applications, transducers function to produce data on the depth or level of water. The submersible pressure transducer, for instance, translates the energy from being submerged into something interpretable, like a graphic chart.

Used in Water
A submersible pressure transducer is used to measure water level. The transducer itself can be completely immersed in water and be resistant to corrosion and other effects that can ruin other electrical devices. It usually comes with a long, vented cable. The purpose of this device is simply to monitor water level—like in a well, water tank, reservoir, river, lake, or shoreline.

A submersible pressure transducer uses piezoelectric technology to measure water pressure and other factors—translating the input into a reading that shows how much the water has risen or fell. The cabling and the transducer casing are shielded from water intrusion by waterproof and non-corroding materials like titanium, platinum, and stainless steel alloys.

Like a Hose
A submersible pressure transducer looks pretty much like a hose with a narrow metal head that’s either welded or sealed with marine epoxy. It works well for both tame and extreme environments. To be accurate in their measurements, a pressure transducer will have to use a temperature-compensation system.

Different models for different water levels are available. One designed for shallow water may be useful for levels down to 3 feet. The models for the deeper depths can be used down to 500 feet. The shallow transducers are typically used in sewers and like waterways. They work even when the water level is only a few inches deep.

Low Power Needed
A submersible pressure transducer is really an amazing device in that it only needs electricity from a twelve volt battery to function. This is sufficient even if the wires in the submersible cable that runs to the device are hundreds of feet long. As a handy electrical device and durable for the demands of remote sensing tasks.

A submersible pressure transducer is a perfect companion tool for data logging, monitoring equipment, and telemetry.

With so many types of transducers, it can be confusing sometimes when it comes to transducer definition. Basically, a transducer is an electrical device that changes energy into some other every output, but the word itself can be used for a number of products with different uses—although still using similar principles to transform energy.

Generic Term
The word “transducer” has been freely used to mean a device used for depth-sounding or for finding fish. But technically, quite a number of other devices more common and ordinarily found in the home environment are also transducers. Examples of these are the microphone and speakers that translate electrical pulses into sound. Even the screen of your television set is a transducer.

As a basic part of electrical gadgets and industrial applications, transducers are actually so commonplace. However, because of their different uses, the generic term has faded in use and is now only associated with devices that people use to catch fish with boats. Thus, if you ask someone about transducer definition, you will likely be referred to an invention that’s attached to the rear end of a boat that displays fishes on a monitor!

Matter of Use
Transducers are generally used to make one form of energy useful as another form. We all know how radio signals are converted into electricity pulses that are turned into sound for us to hear. And of course, we all know it’s possible to hear our friend through our cell phone when he or she is somewhere far away. Transducers make practical things happen.

On the other hand, transducers also help in the display of data which may be interpreted. For instance, body reactions such as an increase or decrease in heat may be relayed to transducers that help translate this change in energy into something readable, like a graph. This is what the polygraph machine does and with it, it’s possible to determine if a person is telling the truth or not.

So, in case you ever wonder again about transducer definition, don’t just think that a transducer is a fish finder. Transducers are everywhere there are electrical gadgets. You may not know where they are or how they work exactly, but they’re there.

Fitting and installing a depth-sounding or fish-finding transducer onto a boat requires familiarity with the transducer being attached as well as the boat or the hull being attached to. A number of things have to be considered beforehand when installing a transducer in order not to waste time, effort, and money.

The Right Transducer
In getting a transducer, inform your source about the boat you’re going to use it with. This is very important since not all transducers will be a fit for your boat. Thus, it’s also vital that you get the opinion of a boat expert if you are not familiar with boats.

The engine system of your boat is always of prime consideration. Among the questions that need to be answered concern your propulsion system which could either be one of the following: single inboard, outboard, inboard/outboard, jet-drive, or sail. The construction of the boat and the angles of the body should also be known beforehand.

The Perfect Spot
A transducer should be mounted at the rear of the boat, but this doesn’t mean just anywhere behind it. There’s an ideal spot for any transducer for it to be able to deliver reliable data to the user.

It’s a good idea to install the transducer near the imaginary line that bisects the boat lengthwise. However, it may not be a good idea to align to the bottom of the boat if the hull is tapered towards the bottom. The main idea is for the transducer installation to be unaffected by turbulence created by the engine. Pushing to install as far as possible to the port or starboard usually gives good results.

General Rules
If you have a single drive outboard, transducer installation should be on the starboard side (right) and out of reach of the propeller radius. On a twin outboard, transducer installation must be in-between the motors. If it’s an inboard motor boat, install on the starboard side away from propeller radius.

The rules used for propeller engines also apply for jet-driven boats. As for sailboats, the starboard side is also standard, but it should always be outside the keel, hull protector, or centerline. As with motor boats, it should be where there is little turbulence from the water.

Don’ts
It is good to keep in mind some protocols on what not to do during transducer installation: (1) Mount the device where it will not get turbulence. (2) Avoid mounting in places where transport support for the boat is secured. (3) Do not install where there are loose boat fittings. (4) Avoid reverse angles of the hull which can hamper data.

Just knowing these few things about transducer installation can already save you much.

Revere Transducers are more commonly known as load cells. They are electronic devices that convert force into electrical signals that become readable to a computer. Revere transducers are prominently used in heavy industries such as construction.

Conversion in Two Stages
Load cells are called transducers because they convert one form of energy into another. Unlike with most types of transducers however, here the transformation process is indirect. It goes through two stages before the conversion is completed.

When force is applied to the revere transducer, what happens is that a strain gauge inside it gets deformed. The strain gauge, which is a device in itself, then converts this deformation, the recorded strain, into an electrical signal.

Load cells can have up to four strain gauges, depending on application requirements. A given strain gauge may be more sensitive to strain in the vertical direction than in the horizontal direction and vice versa.

Signal Amplification
The scale of the ensuing electrical signal is minute. Normally, it is only in the order of millivolts. To render the signal interpretable requires magnification. The device that does this amplification is called an instrumentation amplifier.

Using the amplified signal output as the variable, the force is then calculated with a special algorithm. Hence, force is converted and computed.

Applications
The industrial applications of revere transducers are far ranging. They are used in electronic and wireless crane scales, tank and vessel weighing, onboard weighing, railcar weighing, truck weighing, and any other form of force or tension measurement. Load cells are also useful in monitoring structural health and even locating the center of gravity of an object through its weight.

For adaptability, different types of revere transducers have been built. There are load cells that are for the different kinds of scales—platform, belt, single-point belt, overhead track and pallet. There are those solely for platforms, weighbridges, silo and suspended hopper weighing, and packaging machines.

Although strain gauge load cells are by far the most common type of revere transducers, hydraulic load cells are also used occasionally. These hydrostatic load cells are unaffected by passing voltages such as lightning, so they may be safer to use for outdoor measurements.

Velocity transducers are used to measure velocity and displacement. As such, they have a wide range of industrial applications. There are manufacturers and distributors of velocity transducers all around the world. Listings of these companies can easily be found on the Internet.

At its core, a velocity transducer is basically made up of a suspended magnet surrounded by a conductive coil. The magnet moves when the transducer moves. This movement creates an electrical current that is proportional to the speed of the transducer. Hence, velocity is measured by interpreting the electrical signal generated. With integration, the displacement that results from the movement can be measured as well.

Installation
Gravity is considered when mounting horizontal and vertical velocity transducers. The sensor should have an axis sensitive enough to linear movement. A cross-axis movement however, if strong enough, can damage the sensor or spoil the velocity measurement. Sometimes, sensors are placed on both axial planes to get a clearer signature of the movement.

After installing, there is no need to attune a velocity transducer. As long as it is in good working condition and is mounted on a flat surface, it should work fine. The sensor calibration does require verification once a year, however. Those moving parts inside the sensor break down from fatigue induced by vibration and high temperatures and they can fail in the long run.

It is recommended to dedicate a rigid conduit when installing a velocity transducer. The conduit protects the sensor from noise and mechanical mishaps. The conduit should be metal.

Go Through the Main Points
When installing velocity transducers it is necessary to determine the sensor type. This will let you know if you have the right device for your purpose and machine. Decide on the number of sensors that will be needed. It will help to examine the kind of movement and vibration that are to be expected.

Make sure you use the correct instrument wires. Have a rigid conduit ready and check the grounding. Pick the best location for installation. If these things are in order, then you are good to go.

For complex applications there are other more technical considerations, like sensitivity, frequency range and common point grounding. You may want to ask for expert advice from your local distributor or service company about these salient points.

What is a transducer? A transducer is a device that converts energy. It takes or absorbs one type of energy and transforms it into another type. Transducers are normally used to transfer information into a more interpretable or usable form.

High-tech devices
Cathode ray tubes, potentiometers, galvanometers, Geiger counters, and laser diodes are all transducers. Transducers are widely used in big industries today and are fundamental components to instruments, equipment and machineries.

But transducers are not just devices that only scientists and engineers use in their lines of work. Even ordinary people use them in their daily lives while doing their regular chores. You use transducers at home, in the office, while driving your car. Here are some common transducers which you might not have guessed.

Microphone
Yes, a microphone is a transducer. It captures changes in air pressure—sound waves—and converts them into electrical signals which are then passed on through wires. This type of transducer transforms the acoustic into an electrical manifestation. Telephones, tape recorders and voice amplifiers all use microphones.

As a transducer, the inverse of the microphone would be the loud speaker or the earphone. These devices convert electric signals into acoustic form. In other words, sound.

Antenna
An antenna is also a transducer. It converts electromagnetic waves into electrical currents. This is how your television is able to display images as they are broadcast in remote studios. But it also works the other way around, converting electrical currents and then transmitting them as electromagnetic signals. Antennas are essential in telecommunications.

Light Bulb
You get light when you turn on the switch because the light bulb is a transducer. The switch is a valve that allows electric power to flow to the bulb, which then converts that electric power into visible light. The bulb will continue its conversion and bear light as long as the valve, the switch, is open.

There are many other examples. An electric motor is a transducer, as well as its inverse, the generator. Can you guess why? So the next time you encounter the question “What is a transducer?” just think of it as an energy transformer. They are all around us and we use them every single day.

We all know that as an electronic device, transducers serve to transform one type of energy into another. They are used for various electronic devices. There are particular types of transducers for different applications.

Two Types
For common purposes, transducers are usually classified into two basic types—as either sensor or actuator. The former is primarily a detector and translator of energy such as radio while the latter functions to change an electrical signal into that which is non-electric like sound and graphs. For scientific tools, these could come in the form of data feedback output.

One example of a sensor is sonar, which detects sound waves bounced off surfaces under the ocean and translates them into a non-electrical output such as lines on a chart. On the other hand, a good example of an actuator is the earphone. This changes electrical pulses into magnetic ones which cause vibrations that we hear as sound in the air.

General Transducers
More specific types of transducers are the following—under which may be sub classes that serve specific industrial purposes: Electromagnetic (commonly-used), Electrochemical, Electrostatic, Electromechanical or actuators, Thermoelectric, Electroacoustic, Radioacoustic, and Photoelectric.

The types used for everyday devices are the electromagnetic, electroacoustic, and photoelectric transducers. These can be found in home gadgets that produce sound and light like the radio set, television set and fluorescent lamp. More complex appliances and gadgets like the personal computer are laden with transducers and serve to operate tools or help display specific outputs.

Translation
Transducers change energy using various ways. The piezoelectric effect for one is used to a large extent and comes from the translation of pressure force into electricity that can then be used for a number of device applications. Crystals play an important role in this process as it facilitates the translation of input energy as output energy.

A problem with types of transducers is the loss of energy during the translation process. This is what causer a loss of data, no matter how sleight. This means there is no transducer that is one hundred percent efficient. Nevertheless, they are no less practical for whatever purpose designed.

Where do you get top-of-the-line advanced sensor technology for different types of transducers, switches, scanners, scales, and sensors? Where else but Transducers Direct! The name of the store speaks for itself and it also means you get what you come for. Much of the purchasing process is maximized. Here’s why.

Standardized Sets
For customers to get the most of their time with Transducers Direct, the store applies what is called a “price-tiered, configurable, and standardized set” of products—transducers included. Transducers Direct employs engineers who cater to the needs of customers, making sure they get what they ask for in accordance with what they really need.

This point-of-purchase service makes doing business with Transducers Direct a satisfying experience and this makes it appealing especially to buyers who don’t know much about transducers. Through this, buyers have peace of mind in that they can be assured that the product bought is the correct one.

Real Answers
Transducer Direct prides itself in that it gives real answers to the questions of customers. The company gives a 100% satisfaction guarantee and it covers service, support, quality, performance, compatibility, a quick turnaround, delivery, and others that serve to make it one of the leaders in the industry.

Calls to Transducer Direct are answered quickly and there’s also the alternative Live Chat Support for customer service. Such support is coupled with dynamic product updates on the website which allow for the display of products and their configurations relevant to the expectations of the customer.

Lucrative Reselling
Those who wish to be Transducer Direct resellers and sales partners can expect a lucrative business with the kind of personalized and customized support provided by the company. Special prices are also given to sales partners that lead to better profits.

Because the products from Transducer Direct conform to industry standards and may be configured for every unique situation—qualities that allow for limitless sales potential, success in fields such as Assembly, Construction, and even Pharmaceuticals is typical.

If you’re a reseller or customer, you can benefit from volume purchases from Transducer Direct. The same satisfaction is forthcoming whatever method of ordering you use.

Fish can be hard to find under the water and what you need is a fish finder, a transducer, and of course, a transducer trolling motor mount. A transducer is basically a sonar device that helps you find fish while you drag it along or behind your boat. If there’s a shoal of fish underneath you, the transducer will show it to you on the screen of the fish finder. But for all of this to work, your transducer must have a reliable mount.

Mounted Use
As the name implies, a fish-finding transducer trolling motor mount is meant to be secured to the trolling motor of a fishing vessel. When not needed, this mount is designed to be easily detached. The designs of different models are often streamlined to help reduce drag in the water and to prevent getting tangled in weeds. The mount also serves to protect the device from impacts.

From the mount, the transducer is connected to the fish finder where a monitor shows the fisherman what’s there under the boat. It’s found its way to this kind of use since its early days as a more scientific instrument for research or for military use. The transducer trolling mount has since been reduced in size owing to better technology. Patents are still being applied for unique designs, especially with mounts.

Expert Help
For hobbyists, like bass fishers, a transducer with a good trolling motor mount is a good thing to have, but since it can be a bit technical to deal with, it may require the help of an expert who knows how to choose and install one in your boat. Usually, mount dealers can be helpful already with the support they provide for products purchased from them.

If this kind of support is unavailable, like when you buy a second-hand mounted transducer, you can ask around and if the previous owner is available, you can ask how to secure the transducer to the mount and to the boat. If, on the other hand you’re the kind of do-it-yourself-person, you must take things one step at a time. The biggest one would be to decide if you really need a transducer trolling motor mount.

Getting your fish-finding transducer mounted and useful in your boat is no easy task. You can do a little research online for trolling motor mounts available. With a little patience and advice from those who know about transducers and trolling mounts, you can get your boat up and ready for fishing.